OPEN(P) OPEN(P)
NAME
open - open a file
SYNOPSIS
#include
#include
int open(const char *path, int oflag, ... );
DESCRIPTION
The open() function shall establish the connection between a file and a file descriptor.
It shall create an open file description that refers to a file and a file descriptor that
refers to that open file description. The file descriptor is used by other I/O functions
to refer to that file. The path argument points to a pathname naming the file.
The open() function shall return a file descriptor for the named file that is the lowest
file descriptor not currently open for that process. The open file description is new, and
therefore the file descriptor shall not share it with any other process in the system. The
FD_CLOEXEC file descriptor flag associated with the new file descriptor shall be cleared.
The file offset used to mark the current position within the file shall be set to the
beginning of the file.
The file status flags and file access modes of the open file description shall be set
according to the value of oflag.
Values for oflag are constructed by a bitwise-inclusive OR of flags from the following
list, defined in . Applications shall specify exactly one of the first three val-
ues (file access modes) below in the value of oflag:
O_RDONLY
Open for reading only.
O_WRONLY
Open for writing only.
O_RDWR Open for reading and writing. The result is undefined if this flag is applied to a
FIFO.
Any combination of the following may be used:
O_APPEND
If set, the file offset shall be set to the end of the file prior to each write.
O_CREAT
If the file exists, this flag has no effect except as noted under O_EXCL below.
Otherwise, the file shall be created; the user ID of the file shall be set to the
effective user ID of the process; the group ID of the file shall be set to the
group ID of the file's parent directory or to the effective group ID of the pro-
cess; and the access permission bits (see ) of the file mode shall be
set to the value of the third argument taken as type mode_t modified as follows: a
bitwise AND is performed on the file-mode bits and the corresponding bits in the
complement of the process' file mode creation mask. Thus, all bits in the file mode
whose corresponding bit in the file mode creation mask is set are cleared. When
bits other than the file permission bits are set, the effect is unspecified. The
third argument does not affect whether the file is open for reading, writing, or
for both. Implementations shall provide a way to initialize the file's group ID to
the group ID of the parent directory. Implementations may, but need not, provide
an implementation-defined way to initialize the file's group ID to the effective
group ID of the calling process.
O_DSYNC
Write I/O operations on the file descriptor shall complete as defined by synchro-
nized I/O data integrity completion.
O_EXCL If O_CREAT and O_EXCL are set, open() shall fail if the file exists. The check for
the existence of the file and the creation of the file if it does not exist shall
be atomic with respect to other threads executing open() naming the same filename
in the same directory with O_EXCL and O_CREAT set. If O_EXCL and O_CREAT are set,
and path names a symbolic link, open() shall fail and set errno to [EEXIST],
regardless of the contents of the symbolic link. If O_EXCL is set and O_CREAT is
not set, the result is undefined.
O_NOCTTY
If set and path identifies a terminal device, open() shall not cause the terminal
device to become the controlling terminal for the process.
O_NONBLOCK
When opening a FIFO with O_RDONLY or O_WRONLY set:
* If O_NONBLOCK is set, an open() for reading-only shall return without delay. An
open() for writing-only shall return an error if no process currently has the
file open for reading.
* If O_NONBLOCK is clear, an open() for reading-only shall block the calling
thread until a thread opens the file for writing. An open() for writing-only
shall block the calling thread until a thread opens the file for reading.
When opening a block special or character special file that supports non-blocking opens:
* If O_NONBLOCK is set, the open() function shall return without blocking for the
device to be ready or available. Subsequent behavior of the device is device-
specific.
* If O_NONBLOCK is clear, the open() function shall block the calling thread until
the device is ready or available before returning.
Otherwise, the behavior of O_NONBLOCK is unspecified.
O_RSYNC
Read I/O operations on the file descriptor shall complete at the same level of
integrity as specified by the O_DSYNC and O_SYNC flags. If both O_DSYNC and O_RSYNC
are set in oflag, all I/O operations on the file descriptor shall complete as
defined by synchronized I/O data integrity completion. If both O_SYNC and O_RSYNC
are set in flags, all I/O operations on the file descriptor shall complete as
defined by synchronized I/O file integrity completion.
O_SYNC Write I/O operations on the file descriptor shall complete as defined by synchro-
nized I/O file integrity completion.
O_TRUNC
If the file exists and is a regular file, and the file is successfully opened
O_RDWR or O_WRONLY, its length shall be truncated to 0, and the mode and owner
shall be unchanged. It shall have no effect on FIFO special files or terminal
device files. Its effect on other file types is implementation-defined. The result
of using O_TRUNC with O_RDONLY is undefined.
If O_CREAT is set and the file did not previously exist, upon successful completion,
open() shall mark for update the st_atime, st_ctime, and st_mtime fields of the file and
the st_ctime and st_mtime fields of the parent directory.
If O_TRUNC is set and the file did previously exist, upon successful completion, open()
shall mark for update the st_ctime and st_mtime fields of the file.
If both the O_SYNC and O_DSYNC flags are set, the effect is as if only the O_SYNC flag was
set.
If path refers to a STREAMS file, oflag may be constructed from O_NONBLOCK OR'ed with
either O_RDONLY, O_WRONLY, or O_RDWR. Other flag values are not applicable to STREAMS
devices and shall have no effect on them. The value O_NONBLOCK affects the operation of
STREAMS drivers and certain functions applied to file descriptors associated with STREAMS
files. For STREAMS drivers, the implementation of O_NONBLOCK is device-specific.
If path names the master side of a pseudo-terminal device, then it is unspecified whether
open() locks the slave side so that it cannot be opened. Conforming applications shall
call unlockpt() before opening the slave side.
The largest value that can be represented correctly in an object of type off_t shall be
established as the offset maximum in the open file description.
RETURN VALUE
Upon successful completion, the function shall open the file and return a non-negative
integer representing the lowest numbered unused file descriptor. Otherwise, -1 shall be
returned and errno set to indicate the error. No files shall be created or modified if the
function returns -1.
ERRORS
The open() function shall fail if:
EACCES Search permission is denied on a component of the path prefix, or the file exists
and the permissions specified by oflag are denied, or the file does not exist and
write permission is denied for the parent directory of the file to be created, or
O_TRUNC is specified and write permission is denied.
EEXIST O_CREAT and O_EXCL are set, and the named file exists.
EINTR A signal was caught during open().
EINVAL The implementation does not support synchronized I/O for this file.
EIO The path argument names a STREAMS file and a hangup or error occurred during the
open().
EISDIR The named file is a directory and oflag includes O_WRONLY or O_RDWR.
ELOOP A loop exists in symbolic links encountered during resolution of the path argument.
EMFILE {OPEN_MAX} file descriptors are currently open in the calling process.
ENAMETOOLONG
The length of the path argument exceeds {PATH_MAX} or a pathname component is
longer than {NAME_MAX}.
ENFILE The maximum allowable number of files is currently open in the system.
ENOENT O_CREAT is not set and the named file does not exist; or O_CREAT is set and either
the path prefix does not exist or the path argument points to an empty string.
ENOSR The path argument names a STREAMS-based file and the system is unable to allocate a
STREAM.
ENOSPC The directory or file system that would contain the new file cannot be expanded,
the file does not exist, and O_CREAT is specified.
ENOTDIR
A component of the path prefix is not a directory.
ENXIO O_NONBLOCK is set, the named file is a FIFO, O_WRONLY is set, and no process has
the file open for reading.
ENXIO The named file is a character special or block special file, and the device associ-
ated with this special file does not exist.
EOVERFLOW
The named file is a regular file and the size of the file cannot be represented
correctly in an object of type off_t.
EROFS The named file resides on a read-only file system and either O_WRONLY, O_RDWR,
O_CREAT (if the file does not exist), or O_TRUNC is set in the oflag argument.
The open() function may fail if:
EAGAIN The path argument names the slave side of a pseudo-terminal device that is locked.
EINVAL The value of the oflag argument is not valid.
ELOOP More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the
path argument.
ENAMETOOLONG
As a result of encountering a symbolic link in resolution of the path argument, the
length of the substituted pathname string exceeded {PATH_MAX}.
ENOMEM The path argument names a STREAMS file and the system is unable to allocate
resources.
ETXTBSY
The file is a pure procedure (shared text) file that is being executed and oflag is
O_WRONLY or O_RDWR.
The following sections are informative.
EXAMPLES
Opening a File for Writing by the Owner
The following example opens the file /tmp/file, either by creating it (if it does not
already exist), or by truncating its length to 0 (if it does exist). In the former case,
if the call creates a new file, the access permission bits in the file mode of the file
are set to permit reading and writing by the owner, and to permit reading only by group
members and others.
If the call to open() is successful, the file is opened for writing.
#include
...
int fd;
mode_t mode = S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH;
char *filename = "/tmp/file";
...
fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC, mode);
...
Opening a File Using an Existence Check
The following example uses the open() function to try to create the LOCKFILE file and open
it for writing. Since the open() function specifies the O_EXCL flag, the call fails if the
file already exists. In that case, the program assumes that someone else is updating the
password file and exits.
#include
#include
#include
#define LOCKFILE "/etc/ptmp"
...
int pfd; /* Integer for file descriptor returned by open() call. */
...
if ((pfd = open(LOCKFILE, O_WRONLY | O_CREAT | O_EXCL,
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) == -1)
{
fprintf(stderr, "Cannot open /etc/ptmp. Try again later.\n");
exit(1);
}
...
Opening a File for Writing
The following example opens a file for writing, creating the file if it does not already
exist. If the file does exist, the system truncates the file to zero bytes.
#include
#include
#include
#define LOCKFILE "/etc/ptmp"
...
int pfd;
char filename[PATH_MAX+1];
...
if ((pfd = open(filename, O_WRONLY | O_CREAT | O_TRUNC,
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) == -1)
{
perror("Cannot open output file\n"); exit(1);
}
...
APPLICATION USAGE
None.
RATIONALE
Except as specified in this volume of IEEE Std 1003.1-2001, the flags allowed in oflag are
not mutually-exclusive and any number of them may be used simultaneously.
Some implementations permit opening FIFOs with O_RDWR. Since FIFOs could be implemented in
other ways, and since two file descriptors can be used to the same effect, this possibil-
ity is left as undefined.
See getgroups() about the group of a newly created file.
The use of open() to create a regular file is preferable to the use of creat(), because
the latter is redundant and included only for historical reasons.
The use of the O_TRUNC flag on FIFOs and directories (pipes cannot be open()-ed) must be
permissible without unexpected side effects (for example, creat() on a FIFO must not
remove data). Since terminal special files might have type-ahead data stored in the
buffer, O_TRUNC should not affect their content, particularly if a program that normally
opens a regular file should open the current controlling terminal instead. Other file
types, particularly implementation-defined ones, are left implementation-defined.
IEEE Std 1003.1-2001 permits [EACCES] to be returned for conditions other than those
explicitly listed.
The O_NOCTTY flag was added to allow applications to avoid unintentionally acquiring a
controlling terminal as a side effect of opening a terminal file. This volume of
IEEE Std 1003.1-2001 does not specify how a controlling terminal is acquired, but it
allows an implementation to provide this on open() if the O_NOCTTY flag is not set and
other conditions specified in the Base Definitions volume of IEEE Std 1003.1-2001, Chapter
11, General Terminal Interface are met. The O_NOCTTY flag is an effective no-op if the
file being opened is not a terminal device.
In historical implementations the value of O_RDONLY is zero. Because of that, it is not
possible to detect the presence of O_RDONLY and another option. Future implementations
should encode O_RDONLY and O_WRONLY as bit flags so that:
O_RDONLY | O_WRONLY == O_RDWR
In general, the open() function follows the symbolic link if path names a symbolic link.
However, the open() function, when called with O_CREAT and O_EXCL, is required to fail
with [EEXIST] if path names an existing symbolic link, even if the symbolic link refers to
a nonexistent file. This behavior is required so that privileged applications can create
a new file in a known location without the possibility that a symbolic link might cause
the file to be created in a different location.
For example, a privileged application that must create a file with a predictable name in a
user-writable directory, such as the user's home directory, could be compromised if the
user creates a symbolic link with that name that refers to a nonexistent file in a system
directory. If the user can influence the contents of a file, the user could compromise the
system by creating a new system configuration or spool file that would then be interpreted
by the system. The test for a symbolic link which refers to a nonexisting file must be
atomic with the creation of a new file.
The POSIX.1-1990 standard required that the group ID of a newly created file be set to the
group ID of its parent directory or to the effective group ID of the creating process.
FIPS 151-2 required that implementations provide a way to have the group ID be set to the
group ID of the containing directory, but did not prohibit implementations also supporting
a way to set the group ID to the effective group ID of the creating process. Conforming
applications should not assume which group ID will be used. If it matters, an application
can use chown() to set the group ID after the file is created, or determine under what
conditions the implementation will set the desired group ID.
FUTURE DIRECTIONS
None.
SEE ALSO
chmod() , close() , creat() , dup() , fcntl() , lseek() , read() , umask() , unlockpt() ,
write() , the Base Definitions volume of IEEE Std 1003.1-2001, , ,
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std
1003.1, 2003 Edition, Standard for Information Technology -- Portable Operating System
Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2003 by
the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and The Open Group
Standard, the original IEEE and The Open Group Standard is the referee document. The orig-
inal Standard can be obtained online at http://www.opengroup.org/unix/online.html .
POSIX 2003 OPEN(P)
|