UUCP(P) UUCP(P)
NAME
uucp - system-to-system copy
SYNOPSIS
uucp [-cCdfjmr][-n user] source-file... destination-file
DESCRIPTION
The uucp utility shall copy files named by the source-file argument to the destination-
file argument. The files named can be on local or remote systems.
The uucp utility cannot guarantee support for all character encodings in all circum-
stances. For example, transmission data may be restricted to 7 bits by the underlying net-
work, 8-bit data and filenames need not be portable to non-internationalized systems, and
so on. Under these circumstances, it is recommended that only characters defined in the
ISO/IEC 646:1991 standard International Reference Version (equivalent to ASCII) 7-bit
range of characters be used, and that only characters defined in the portable filename
character set be used for naming files. The protocol for transfer of files is unspecified
by IEEE Std 1003.1-2001.
Typical implementations of this utility require a communications line configured to use
the Base Definitions volume of IEEE Std 1003.1-2001, Chapter 11, General Terminal Inter-
face, but other communications means may be used. On systems where there are no available
communications means (either temporarily or permanently), this utility shall write an
error message describing the problem and exit with a non-zero exit status.
OPTIONS
The uucp utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001,
Section 12.2, Utility Syntax Guidelines.
The following options shall be supported:
-c Do not copy local file to the spool directory for transfer to the remote machine
(default).
-C Force the copy of local files to the spool directory for transfer.
-d Make all necessary directories for the file copy (default).
-f Do not make intermediate directories for the file copy.
-j Write the job identification string to standard output. This job identification can
be used by uustat to obtain the status or terminate a job.
-m Send mail to the requester when the copy is completed.
-n user
Notify user on the remote system that a file was sent.
-r Do not start the file transfer; just queue the job.
OPERANDS
The following operands shall be supported:
destination-file, source-file
A pathname of a file to be copied to, or from, respectively. Either name can be a
pathname on the local machine, or can have the form:
system-name!pathname
where system-name is taken from a list of system names that uucp knows about. The destina-
tion system-name can also be a list of names such as:
system-name!system-name!...!system-name!pathname
in which case, an attempt is made to send the file via the specified route to the destina-
tion. Care should be taken to ensure that intermediate nodes in the route are willing to
forward information.
The shell pattern matching notation characters '?' , '*' , and "[...]" appearing in path-
name shall be expanded on the appropriate system.
Pathnames can be one of:
1. An absolute pathname.
2. A pathname preceded by ~ user where user is a login name on the specified sys-
tem and is replaced by that user's login directory. Note that if an invalid
login is specified, the default is to the public directory (called PUBDIR; the
actual location of PUBDIR is implementation-defined).
3. A pathname preceded by ~/ destination where destination is appended to PUBDIR.
Note:
This destination is treated as a filename unless more than one file is being
transferred by this request or the destination is already a directory. To
ensure that it is a directory, follow the destination with a '/' . For exam-
ple, ~/dan/ as the destination makes the directory PUBDIR/dan if it does not
exist and puts the requested files in that directory.
4. Anything else shall be prefixed by the current directory.
If the result is an erroneous pathname for the remote system, the copy shall fail. If the
destination-file is a directory, the last part of the source-file name shall be used.
The read, write, and execute permissions given by uucp are implementation-defined.
STDIN
Not used.
INPUT FILES
The files to be copied are regular files.
ENVIRONMENT VARIABLES
The following environment variables shall affect the execution of uucp:
LANG Provide a default value for the internationalization variables that are unset or
null. (See the Base Definitions volume of IEEE Std 1003.1-2001, Section 8.2, Inter-
nationalization Variables for the precedence of internationalization variables used
to determine the values of locale categories.)
LC_ALL If set to a non-empty string value, override the values of all the other interna-
tionalization variables.
LC_COLLATE
Determine the locale for the behavior of ranges, equivalence classes, and multi-
character collating elements within bracketed filename patterns.
LC_CTYPE
Determine the locale for the interpretation of sequences of bytes of text data as
characters (for example, single-byte as opposed to multi-byte characters in argu-
ments and input files) and the behavior of character classes within bracketed file-
name patterns (for example, "'[[:lower:]]*'" ).
LC_MESSAGES
Determine the locale that should be used to affect the format and contents of diag-
nostic messages written to standard error, and informative messages written to
standard output.
NLSPATH
Determine the location of message catalogs for the processing of LC_MESSAGES .
ASYNCHRONOUS EVENTS
Default.
STDOUT
Not used.
STDERR
The standard error shall be used only for diagnostic messages.
OUTPUT FILES
The output files (which may be on other systems) are copies of the input files.
If -m is used, mail files are modified.
EXTENDED DESCRIPTION
None.
EXIT STATUS
The following exit values shall be returned:
0 Successful completion.
>0 An error occurred.
CONSEQUENCES OF ERRORS
Default.
The following sections are informative.
APPLICATION USAGE
The domain of remotely accessible files can (and for obvious security reasons usually
should) be severely restricted.
Note that the '!' character in addresses has to be escaped when using csh as a command
interpreter because of its history substitution syntax. For ksh and sh the escape is not
necessary, but may be used.
As noted above, shell metacharacters appearing in pathnames are expanded on the appropri-
ate system. On an internationalized system, this is done under the control of local set-
tings of LC_COLLATE and LC_CTYPE . Thus, care should be taken when using bracketed file-
name patterns, as collation and typing rules may vary from one system to another. Also be
aware that certain types of expression (that is, equivalence classes, character classes,
and collating symbols) need not be supported on non-internationalized systems.
EXAMPLES
None.
RATIONALE
None.
FUTURE DIRECTIONS
None.
SEE ALSO
mailx , uuencode , uustat , uux
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std
1003.1, 2003 Edition, Standard for Information Technology -- Portable Operating System
Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2003 by
the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and The Open Group
Standard, the original IEEE and The Open Group Standard is the referee document. The orig-
inal Standard can be obtained online at http://www.opengroup.org/unix/online.html .
POSIX 2003 UUCP(P)
|