IO::Uncompress::RawInflate(3) User Contributed Perl Documentation IO::Uncompress::RawInflate(3)
NAME
IO::Uncompress::RawInflate - Read RFC 1951 files/buffers
SYNOPSIS
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
my $status = rawinflate $input => $output [,OPTS]
or die "rawinflate failed: $RawInflateError\n";
my $z = new IO::Uncompress::RawInflate $input [OPTS]
or die "rawinflate failed: $RawInflateError\n";
$status = $z->read($buffer)
$status = $z->read($buffer, $length)
$status = $z->read($buffer, $length, $offset)
$line = $z->getline()
$char = $z->getc()
$char = $z->ungetc()
$char = $z->opened()
$status = $z->inflateSync()
$data = $z->trailingData()
$status = $z->nextStream()
$data = $z->getHeaderInfo()
$z->tell()
$z->seek($position, $whence)
$z->binmode()
$z->fileno()
$z->eof()
$z->close()
$RawInflateError ;
# IO::File mode
<$z>
read($z, $buffer);
read($z, $buffer, $length);
read($z, $buffer, $length, $offset);
tell($z)
seek($z, $position, $whence)
binmode($z)
fileno($z)
eof($z)
close($z)
DESCRIPTION
This module provides a Perl interface that allows the reading of files/buffers that con-
form to RFC 1951.
For writing RFC 1951 files/buffers, see the companion module IO::Compress::RawDeflate.
Functional Interface
A top-level function, "rawinflate", is provided to carry out "one-shot" uncompression
between buffers and/or files. For finer control over the uncompression process, see the
"OO Interface" section.
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
rawinflate $input => $output [,OPTS]
or die "rawinflate failed: $RawInflateError\n";
The functional interface needs Perl5.005 or better.
rawinflate $input => $output [, OPTS]
"rawinflate" expects at least two parameters, $input and $output.
The $input parameter
The parameter, $input, is used to define the source of the compressed data.
It can take one of the following forms:
A filename
If the $input parameter is a simple scalar, it is assumed to be a filename. This file
will be opened for reading and the input data will be read from it.
A filehandle
If the $input parameter is a filehandle, the input data will be read from it. The
string '-' can be used as an alias for standard input.
A scalar reference
If $input is a scalar reference, the input data will be read from $$input.
An array reference
If $input is an array reference, each element in the array must be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only contains valid filenames
before any data is uncompressed.
An Input FileGlob string
If $input is a string that is delimited by the characters "<" and ">" "rawinflate"
will assume that it is an input fileglob string. The input is the list of files that
match the fileglob.
If the fileglob does not match any files ...
See File::GlobMapper for more details.
If the $input parameter is any other type, "undef" will be returned.
The $output parameter
The parameter $output is used to control the destination of the uncompressed data. This
parameter can take one of these forms.
A filename
If the $output parameter is a simple scalar, it is assumed to be a filename. This
file will be opened for writing and the uncompressed data will be written to it.
A filehandle
If the $output parameter is a filehandle, the uncompressed data will be written to
it. The string '-' can be used as an alias for standard output.
A scalar reference
If $output is a scalar reference, the uncompressed data will be stored in $$output.
An Array Reference
If $output is an array reference, the uncompressed data will be pushed onto the
array.
An Output FileGlob
If $output is a string that is delimited by the characters "<" and ">" "rawinflate"
will assume that it is an output fileglob string. The output is the list of files
that match the fileglob.
When $output is an fileglob string, $input must also be a fileglob string. Anything
else is an error.
If the $output parameter is any other type, "undef" will be returned.
Notes
When $input maps to multiple compressed files/buffers and $output is a single file/buffer,
after uncompression $output will contain a concatenation of all the uncompressed data from
each of the input files/buffers.
Optional Parameters
Unless specified below, the optional parameters for "rawinflate", "OPTS", are the same as
those used with the OO interface defined in the "Constructor Options" section below.
"AutoClose => 0|1"
This option applies to any input or output data streams to "rawinflate" that are
filehandles.
If "AutoClose" is specified, and the value is true, it will result in all input
and/or output filehandles being closed once "rawinflate" has completed.
This parameter defaults to 0.
"BinModeOut => 0|1"
When writing to a file or filehandle, set "binmode" before writing to the file.
Defaults to 0.
"Append => 0|1"
TODO
"MultiStream => 0|1"
This option is a no-op.
"TrailingData => $scalar"
Returns the data, if any, that is present immediately after the compressed data
stream once uncompression is complete.
This option can be used when there is useful information immediately following the
compressed data stream, and you don't know the length of the compressed data stream.
If the input is a buffer, "trailingData" will return everything from the end of the
compressed data stream to the end of the buffer.
If the input is a filehandle, "trailingData" will return the data that is left in the
filehandle input buffer once the end of the compressed data stream has been reached.
You can then use the filehandle to read the rest of the input file.
Don't bother using "trailingData" if the input is a filename.
If you know the length of the compressed data stream before you start uncompressing,
you can avoid having to use "trailingData" by setting the "InputLength" option.
Examples
To read the contents of the file "file1.txt.1951" and write the compressed data to the
file "file1.txt".
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
my $input = "file1.txt.1951";
my $output = "file1.txt";
rawinflate $input => $output
or die "rawinflate failed: $RawInflateError\n";
To read from an existing Perl filehandle, $input, and write the uncompressed data to a
buffer, $buffer.
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
use IO::File ;
my $input = new IO::File " \$buffer
or die "rawinflate failed: $RawInflateError\n";
To uncompress all files in the directory "/my/home" that match "*.txt.1951" and store the
compressed data in the same directory
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
rawinflate '' => ''
or die "rawinflate failed: $RawInflateError\n";
and if you want to compress each file one at a time, this will do the trick
use strict ;
use warnings ;
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
for my $input ( glob "/my/home/*.txt.1951" )
{
my $output = $input;
$output =~ s/.1951// ;
rawinflate $input => $output
or die "Error compressing '$input': $RawInflateError\n";
}
OO Interface
Constructor
The format of the constructor for IO::Uncompress::RawInflate is shown below
my $z = new IO::Uncompress::RawInflate $input [OPTS]
or die "IO::Uncompress::RawInflate failed: $RawInflateError\n";
Returns an "IO::Uncompress::RawInflate" object on success and undef on failure. The vari-
able $RawInflateError will contain an error message on failure.
If you are running Perl 5.005 or better the object, $z, returned from IO::Uncompress::Raw-
Inflate can be used exactly like an IO::File filehandle. This means that all normal input
file operations can be carried out with $z. For example, to read a line from a compressed
file/buffer you can use either of these forms
$line = $z->getline();
$line = <$z>;
The mandatory parameter $input is used to determine the source of the compressed data.
This parameter can take one of three forms.
A filename
If the $input parameter is a scalar, it is assumed to be a filename. This file will
be opened for reading and the compressed data will be read from it.
A filehandle
If the $input parameter is a filehandle, the compressed data will be read from it.
The string '-' can be used as an alias for standard input.
A scalar reference
If $input is a scalar reference, the compressed data will be read from $$output.
Constructor Options
The option names defined below are case insensitive and can be optionally prefixed by a
'-'. So all of the following are valid
-AutoClose
-autoclose
AUTOCLOSE
autoclose
OPTS is a combination of the following options:
"AutoClose => 0|1"
This option is only valid when the $input parameter is a filehandle. If specified,
and the value is true, it will result in the file being closed once either the
"close" method is called or the IO::Uncompress::RawInflate object is destroyed.
This parameter defaults to 0.
"MultiStream => 0|1"
Allows multiple concatenated compressed streams to be treated as a single compressed
stream. Decompression will stop once either the end of the file/buffer is reached, an
error is encountered (premature eof, corrupt compressed data) or the end of a stream
is not immediately followed by the start of another stream.
This parameter defaults to 0.
"Prime => $string"
This option will uncompress the contents of $string before processing the input
file/buffer.
This option can be useful when the compressed data is embedded in another file/data
structure and it is not possible to work out where the compressed data begins without
having to read the first few bytes. If this is the case, the uncompression can be
primed with these bytes using this option.
"Transparent => 0|1"
If this option is set and the input file/buffer is not compressed data, the module
will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and there is non-
compressed data immediately following it, setting this option will make this module
treat the whole file/bufffer as a single data stream.
This option defaults to 1.
"BlockSize => $num"
When reading the compressed input data, IO::Uncompress::RawInflate will read it in
blocks of $num bytes.
This option defaults to 4096.
"InputLength => $size"
When present this option will limit the number of compressed bytes read from the
input file/buffer to $size. This option can be used in the situation where there is
useful data directly after the compressed data stream and you know beforehand the
exact length of the compressed data stream.
This option is mostly used when reading from a filehandle, in which case the file
pointer will be left pointing to the first byte directly after the compressed data
stream.
This option defaults to off.
"Append => 0|1"
This option controls what the "read" method does with uncompressed data.
If set to 1, all uncompressed data will be appended to the output parameter of the
"read" method.
If set to 0, the contents of the output parameter of the "read" method will be over-
written by the uncompressed data.
Defaults to 0.
"Strict => 0|1"
This option is a no-op.
Examples
TODO
Methods
read
Usage is
$status = $z->read($buffer)
Reads a block of compressed data (the size the the compressed block is determined by the
"Buffer" option in the constructor), uncompresses it and writes any uncompressed data into
$buffer. If the "Append" parameter is set in the constructor, the uncompressed data will
be appended to the $buffer parameter. Otherwise $buffer will be overwritten.
Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative
number on error.
read
Usage is
$status = $z->read($buffer, $length)
$status = $z->read($buffer, $length, $offset)
$status = read($z, $buffer, $length)
$status = read($z, $buffer, $length, $offset)
Attempt to read $length bytes of uncompressed data into $buffer.
The main difference between this form of the "read" method and the previous one, is that
this one will attempt to return exactly $length bytes. The only circumstances that this
function will not is if end-of-file or an IO error is encountered.
Returns the number of uncompressed bytes written to $buffer, zero if eof or a negative
number on error.
getline
Usage is
$line = $z->getline()
$line = <$z>
Reads a single line.
This method fully supports the use of of the variable $/ (or $INPUT_RECORD_SEPARATOR or
$RS when "English" is in use) to determine what constitutes an end of line. Paragraph
mode, record mode and file slurp mode are all supported.
getc
Usage is
$char = $z->getc()
Read a single character.
ungetc
Usage is
$char = $z->ungetc($string)
inflateSync
Usage is
$status = $z->inflateSync()
TODO
getHeaderInfo
Usage is
$hdr = $z->getHeaderInfo();
@hdrs = $z->getHeaderInfo();
This method returns either a hash reference (in scalar context) or a list or hash refer-
ences (in array context) that contains information about each of the header fields in the
compressed data stream(s).
tell
Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
eof
Usage is
$z->eof();
eof($z);
Returns true if the end of the compressed input stream has been reached.
seek
$z->seek($position, $whence);
seek($z, $position, $whence);
Provides a sub-set of the "seek" functionality, with the restriction that it is only legal
to seek forward in the input file/buffer. It is a fatal error to attempt to seek back-
ward.
The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
binmode
Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
opened
$z->opened()
Returns true if the object currently refers to a opened file/buffer.
autoflush
my $prev = $z->autoflush()
my $prev = $z->autoflush(EXPR)
If the $z object is associated with a file or a filehandle, this method returns the cur-
rent autoflush setting for the underlying filehandle. If "EXPR" is present, and is
non-zero, it will enable flushing after every write/print operation.
If $z is associated with a buffer, this method has no effect and always returns "undef".
Note that the special variable $| cannot be used to set or retrieve the autoflush setting.
input_line_number
$z->input_line_number()
$z->input_line_number(EXPR)
Returns the current uncompressed line number. If "EXPR" is present it has the effect of
setting the line number. Note that setting the line number does not change the current
position within the file/buffer being read.
The contents of $/ are used to to determine what constitutes a line terminator.
fileno
$z->fileno()
fileno($z)
If the $z object is associated with a file or a filehandle, "fileno" will return the
underlying file descriptor. Once the "close" method is called "fileno" will return
"undef".
If the $z object is is associated with a buffer, this method will return "undef".
close
$z->close() ;
close $z ;
Closes the output file/buffer.
For most versions of Perl this method will be automatically invoked if the IO::Uncom-
press::RawInflate object is destroyed (either explicitly or by the variable with the ref-
erence to the object going out of scope). The exceptions are Perl versions 5.005 through
5.00504 and 5.8.0. In these cases, the "close" method will be called automatically, but
not until global destruction of all live objects when the program is terminating.
Therefore, if you want your scripts to be able to run on all versions of Perl, you should
call "close" explicitly and not rely on automatic closing.
Returns true on success, otherwise 0.
If the "AutoClose" option has been enabled when the IO::Uncompress::RawInflate object was
created, and the object is associated with a file, the underlying file will also be
closed.
nextStream
Usage is
my $status = $z->nextStream();
Skips to the next compressed data stream in the input file/buffer. If a new compressed
data stream is found, the eof marker will be cleared and $. will be reset to 0.
Returns 1 if a new stream was found, 0 if none was found, and -1 if an error was encoun-
tered.
trailingData
Usage is
my $data = $z->trailingData();
Returns the data, if any, that is present immediately after the compressed data stream
once uncompression is complete. It only makes sense to call this method once the end of
the compressed data stream has been encountered.
This option can be used when there is useful information immediately following the com-
pressed data stream, and you don't know the length of the compressed data stream.
If the input is a buffer, "trailingData" will return everything from the end of the com-
pressed data stream to the end of the buffer.
If the input is a filehandle, "trailingData" will return the data that is left in the
filehandle input buffer once the end of the compressed data stream has been reached. You
can then use the filehandle to read the rest of the input file.
Don't bother using "trailingData" if the input is a filename.
If you know the length of the compressed data stream before you start uncompressing, you
can avoid having to use "trailingData" by setting the "InputLength" option in the con-
structor.
Importing
No symbolic constants are required by this IO::Uncompress::RawInflate at present.
:all Imports "rawinflate" and $RawInflateError. Same as doing this
use IO::Uncompress::RawInflate qw(rawinflate $RawInflateError) ;
EXAMPLES
Working with Net::FTP
See IO::Uncompress::RawInflate::FAQ
SEE ALSO
Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate,
IO::Uncompress::Inflate, IO::Compress::RawDeflate, IO::Compress::Bzip2, IO::Uncom-
press::Bunzip2, IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncom-
press::UnLzf, IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress
Compress::Zlib::FAQ
File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib
For RFC 1950, 1951 and 1952 see http://www.faqs.org/rfcs/rfc1950.html,
http://www.faqs.org/rfcs/rfc1951.html and http://www.faqs.org/rfcs/rfc1952.html
The zlib compression library was written by Jean-loup Gailly and Mark
Adler .
The primary site for the zlib compression library is http://www.zlib.org.
The primary site for gzip is http://www.gzip.org.
AUTHOR
This module was written by Paul Marquess, .
MODIFICATION HISTORY
See the Changes file.
COPYRIGHT AND LICENSE
Copyright (c) 2005-2009 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
perl v5.8.8 2009-03-28 IO::Uncompress::RawInflate(3)
|